Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes

Tools/Maintenance

Boeshield T-9 Lubricant
$9.99 - $13.00
- Developed by the Boeing company for lubrication and protection of aircraft components - Dries to a thin waxy film that clings to metal for months - Law prohibits ORM-D materials from shipping by air
Finish Line Wet Lubricant
$6.00 - $32.99
For extreme conditions, you need an extreme lube. That's when you grab Finish Line's Wet Lubricant. It's ultra water-resistant and long-lasting thanks to its special formulation of synthetic oils, special polymers and anti-wear additives. This lube delivers superb drivetrain lubrication and protection and it's the ultimate choice for muddy off-road rides, all-day epics and long, rainy commutes. - Formulated with high viscosity synthetic oils, water repelling polymers, and advanced anti-wear additives - Will require more attention to drivetrain cleanliness, but delivers the ultimate in lubricity and protection - Upon application, wipe excess off chain to minimize attraction of dirt and grime - Finish Line's Wet Lubricant delivers the ultimate in lubricity and protection. It requires a little more attention to drivetrain cleanliness compared to Finish Line's Dry or Wax lubes.
Feedback Sports Sport-Mechanic Bicycle Repair Stand
$180.00
The Sport Mechanic Bike Repair Stand prioritizes the most critical aspects of the entire Feedback Sports bike repair stand lineup – compatibility, stability, durability and portability. The 360-degree rotating clamp uses a spinner knob closure that can accommodate up to 1.9? (4.8cm) and support 65lbs (29.5kg). Plus, the Sport Mechanic leverages the same 54? (137cm) wide base, with rubber-coated end caps, for amazing stability on any surface. And when the service day is done, it folds in to a compact unit for storage or travel. Add an available Travel Bag and a Tool Tray for the optimal bike maintenance setup.
Finish Line Max Suspension Spray (12-Ounce Spray)
$10.00
Whether you're fine-tuning your new full-suspension rig or tuning a fork you've ridden for years, Finish Line's Max Suspension Spray is a pro-grade stiction-fighting stanchion lubricant that maximizes the performance of your suspension. It smooths suspensions that have become dry or dirty and restores full travel and eliminates noise, too. Use Max before rides to ensure maximum responsiveness over the smallest of bumps, and the longest possible travel over extreme terrain. And, use Max to break in new forks or bring old ones back to life. It also conditions and protects rubber seals and O-rings and improves the surface slip of coated stanchions.
Park Tool Mini Chain Brute Chain Tool
$17.95
Park's Mini Chain Brute Chain Tool goes anywhere and features a V-shaped handle, a super-strong replaceable pin, and fine threads to make chain removal and installation a breeze. The CT-5 works on any derailleur chain, including Shimano Hyperglide and 9-, 10-, and 11-speed. It works for loosening tight links, too.
Finish Line Fiber Grip Assembly Gel
$8.00
Finish Line's Fiber Grip Assembly Gel is specially designed to create friction and reduce slippage between clamped carbon fiber surfaces. It eliminates the need to over tighten clamps to achieve secure connections. Plus, it's been tested and approved by leading carbon fiber component manufacturers.
Park Tool Gear Clean Brush
$5.00
Park's Gear Clean Brush has a handle on one end with a curved, serrated edge perfect for cleaning between cassette cogs. The other end's tough nylon bristles are ideal for cleaning the derailleurs, chain and other drivetrain parts to keep them clean and prevent premature wear. It also works great on brakes and other components that collect dirt and grime. The GearClean easily fits in a toolbox or pack.
Lezyne CNC Chain Rod
$40.00
Lezyne's CNC Chain Rod is designed for heavy-duty use. Featuring a custom Lezyne chain that is easily replaced, this tool is built to get the job done every time. The handle is CNC-machined for strength and stylish good looks, and there's even an included lockring tool. Hang this beauty on your wall for all future cassette changes.
Finish Line Super Bike Wash (1-Liter Bottle w/Sprayer)
$14.00
Finish Line's Super Bike Wash quickly cleans dirt, clay, road grime and chain gunk off your bike. Five different cleaning agents work together to create a high-speed cleaning system. Three different rust and oxidation inhibitors protect metal surfaces to prevent rusting. It's safe for all bike surfaces.
Stan's NoTubes Dart Tool
$25.00
Stan's Dual Action Repair for Tubeless (DART) fixes damaged tires faster, easier, and better than existing plug tools. While traditional tire plugs try to wedge rubber strips into a puncture, the DART creates a chemical reaction with your Stan's sealant to quickly form a permanent airtight bond. The DART's plastic tip is barbed to anchor firmly in place and stay put during even the most aggressive riding while being safer for rims, rim tape, and your hands. The material of the DART is also more flexible, and its laser-cut shape is optimized to contour to the shape of different punctures, maximizing surface area to increase the sealing reaction. Because the DART anchors to your tire and creates an instant bond with your sealant, it also won't pull out while riding the way a conventional plug can. One of the best features of the DART's design is that it doesn't require trimming once inserted, and excess material won't get in the way of your ride. DARTs can't be felt while riding, even on road tires, and they wear smooth naturally. - Repairs large punctures and slices - Reacts with Stan's sealant to form an instant, airtight seal - Barbed plastic tip anchors into tire and will not pull out when riding - Flexible material and laser-cut shape conforms to puncture and bonds with sealant - Wears off clean, no trimming needed, and can not be felt while riding, even on road tires - Lightweight, compact tool fits the shape of your hand for more precise use and includes built-in valve core remover - Includes two pre-loaded DARTs for sealing multiple and larger punctures - Clear caps keep DARTs clean and unthread quickly for fast deployment - Simple and easy to refill
Park Tool Chain Checker
$29.99
To prevent poor shifting and uneven drivetrain wear, most manufacturers recommend chain replacement at or before 1% stretch. Now you can quickly and accurately determine the wear and stretch of any chain with Park's Chain Checker. Simply insert the Chain Checker’s pins into 2 links, press the swingarm gauge tight, and then check the gauge window for an accurate reading!
Bontrager Bike Wash
$13.00
A high-performance bike wash that’s designed to clean your bicycle gently and effectively to keep it looking its best. So fresh and so clean Superior dirt-lifting and cleaning abilities make Bontrager's Bike Wash the easiest and most effective way to clean your bike. It's formulated specifically for bicycles, so you can save your dish soap for the dishes and your shampoo for the shower. Product details - High-performance bike wash designed for all bikes and all paint finishes - Proprietary formula is Trek's factory-recommended bike wash - Also great for cleaning wheels, tires, and shoes - Pleasing cherry scent - Spray directly on bike, wait to allow it to soak, and clean with soft brush - 32 fl oz (946mL) spray bottle is easy to use and refillable with diluted Bontrager Degreaser - Keep out of reach of children and do not ingest
Bontrager Grease
$10.00
This ultra-high-performance grease is ideal for use on bicycles. The low-friction formula resists water and contaminants without standing out on the bike Product details - Performance waterproof grease for bicycle bearings, seals, assembly, and more - The formula reduces friction while performing longer between service intervals - Superior water washout resistance stands up to power washing - Unscented and undyed - As with all grease, clean and remove old grease first to guarantee compatibility - Compatible with Loctite Threadlocker and all metals, plastics, and carbon fiber - Available in a wide range of sizes and dispensing methods - 3oz (85g) cartridge is most compatible with the Bontrager Grease Gun
Park Tool Crank Puller (Octalink / Isis)
$19.00
Park's Crank Puller is for removing crankarms on Shimano's splined, oversize, pipe-billet bottom brackets. It employs a long handle and a fine thread for the leverage and torque needed to remove tight arms. Park's unique rotating tip ensures smooth operation and long life. (The CCP-44 does not fit standard square or tapered bottom brackets.)
Sunlite Pencil Air Gauge
$4.00
• Pencil type w/clip
Finish Line Super Bike Wash (1-Gallon Jug)
$23.00
Finish Line's Super Bike Wash quickly cleans dirt, clay, road grime and chain gunk off your bike. Five different cleaning agents work together to create a high-speed cleaning system. Three different rust and oxidation inhibitors protect metal surfaces to prevent rusting. It's safe for all bike surfaces.
Finish Line Citrus Degreaser (1-Gallon Jug)
$55.00
Finish Line's Citrus Degreaser was cycling's original orange peel-based degreaser and it has set the standard in bike parts cleaning since 1988. Super strong and fast-working to cut through grime and crud, it's formulated with powerful and natural citrus extracts. With Citrus your drivetrain will clean up faster and with less scrubbing whether it's covered with grease, oil or wax. Plus, you can simply rinse with water for a residue-free finish.
Park Tool High Performance Grease
$13.49
HPG-1 Park Tool High Performance Grease is proprietarily blended to meet the demanding needs of today’s high performance bicycles and high end components. -Superior adherence and extended lubrication life -Extreme temperature range: -20°F to 540°F (-29°C to 282°C) -Highly water resistant -Perfect for high end applications including precision ground and ceramic bearings, pivots and suspension components 4-ounce (113 g) tube
Avid DOT 5.1 Brake Fluid
$13.00
Keep your brakes performing at their best with Avid's DOT 5.1 Brake Fluid. They're compatible with all Avid disc brake seals. You'll get a 4-ounce bottle of fluid.
Park Tool Shop Screwdriver Set
$22.95
Park handles all of your screwdriver needs with their Shop Screwdriver Set that includes 3mm and 6mm regular, and #0 and #2 Phillips screwdrivers. They feature heat-treated chrome-vanadium tips and shafts for maximum durability plus dual-density grips for top control and comfort.
Park Tool Double-Ended Cone Wrench
$5.95
Park's Double-Ended Cone Wrenches are designed for home mechanics. They're made of thin tool steel to fit the low-clearance adjusting nuts and cone flats on a variety of bearing assemblies. Each wrench is chrome plated for long life and available in popular combinations from 11 to 18mm. Most applications require a pair of cone wrenches. Call or stop by. We can recommend the correct sizes for your needs.
Park Tool Bottom Bracket Tool (Octalink / Isis)
$17.95
Park's BBT-18 is a heavy duty, investment cast tool for installing and removing all Shimano, ISIS Drive, and ISIS Overdrive 8-notch bottom bracket cups.
Park Tool Derailleur Screwdriver
$35.00
Precision component screwdriver machined to exact standards to ensure a perfect fit on compatible component fasteners. Featuring an ergonomic, CNC machined and hard anodized 6061 aluminum handle.
Park Tool Multi-Tool
$19.00 - $25.00
The MT-10, 20, 30 and 40 are high quality folding take-along tools that feature forged aluminum side plates, a mix of hardened and plated tools, and smooth ergonomic operation.
White Lightning Matte Finisher
$9.00
Matte Finisher, 19oz Spray Bottle Matte Finisher delivers a streak-free, gloss-free finish, which helps matte finish bikes look "showroom" new. Also safe for use on clear-coated bicycles.
Fox Racing Shox PTFE Infused 5 Weight Suspension Fluid
$18.00
5 Weight Damper Fluid For rebuild and repair of Fox suspension.
Park Tool Tire Lever Set (Set of 2)
$4.49
• Updated with a new material and new design • Features a wide flat tip for easy entry and fast tire removal, ergonomic shape and a handy spoke hook when multiple levers are needed • Perfect for tight beads and tubeless tires • Sold in sets of two.
Park Tool Hydraulic Brake Piston Press
$20.00
Park's Hydraulic Brake Piston Press is used to set or reset the piston(s) inside hydraulic disc brake calipers during installation, maintenance and repair. Just push it into the caliper to wedge the piston into place. It's made of tough tool steel with a comfortable and oversize rubber handle for a great grip.
Finish Line DOT 5.1 Brake Fluid (4-Ounce Bottle)
$14.00
Finish Line's DOT 5.1 Brake Fluid is a high-quality fluid for maximum life and braking power. It exceeds the most stringent 5.1 specs and is compatible/mixable with all DOT 3, 4 or 5.1 spec'd systems. It also features a super-low viscosity to yield superior lever response and pad retraction. Plus, it won't foam up even on long, challenging downhills.
Park Tool Press Fit Retaining Compound
$16.00
Fills gaps and helps retain non-threaded parts like Press-fit bottom bracket parts, sealed bearings etc. Notice: Park Tool AP-1 Adhesive Primer must be used to prep all components, fasteners and carbon fiber surfaces prior to application of Park Tool threadlockers or retaining compound. Failure to do so could result in permanently bonded parts.
Page 1 of 4 Next page